How Cold Working Strengthens Metal
In most cases, metal is cast or forged into the desired shape after it is made malleable through the application of heat. Cold working refers to the process of strengthening a metal by changing its shape without the use of heat.
This process, also known as plastic deformation, involves strengthening a metal by changing its shape. This process is also known as plastic deformation or work hardening. This metalworking technique involves subjecting the metal to mechanical stress so as to cause a permanent change to the metal's crystalline structure.
How Cold Working Changes Metal
The process gets its name because it is conducted at temperatures below the metal's recrystallization point and mechanical stress, not heat, is used to affect change. The technique is most commonly applied to steel, aluminum, and copper.
When these metals are cold worked, permanent defects change their crystalline makeup. These defects reduce the ability of crystals to move within the metal structure and the metal becomes more resistant to further deformation.
The resulting metal product has improved tensile strength and hardness, but less ductility. Cold rolling and cold drawing of steel also improve surface finish.
Types of Cold Working
The major cold-working methods can be classified as squeezing or rolling, bending, shearing and drawing. See the table below for a summary of the various methods for cold working metal.
Br and tube drawing
High-energy rate forming
Most Common Methods of Work Hardening
With so many options for work hardening, how do manufacturers decide which to use? It depends, to a large degree, on the use to which the metal will be put. Here are three of the common types of work hardening:
- Cold rolling is the most common method of work hardening. This involves the metal being passed through pairs of rollers to reduce its thickness or to make the thickness uniform. As it moves through the rollers and is compressed, the metal grains are deformed. Examples of cold-rolled products include steel sheets, strips, bars, and rods.
- Bending of sheet metal is another process for cold working, which involves deforming metal over a work axis, thereby creating a change in the metals geometry. In this method, the shape changes, but the volume of the metal remains constant. An example of this bending process is simply bending of steel or aluminum parts to meet the desired curvature. Many car parts, for example, have to be bent in order to fit manufacture dimensions.
- Drawing, by contrast, essentially involves pulling the metal through a small hole or die. This reduces the diameter of a metal rod or wire while increasing the product's length. The raw metal is pushed into the die via compression force to ensure that recrystallization occurs as the metal changes shape. Products made via this process include steel bars and aluminum rods.