The Properties and Composition of Monel 400
This nickel-copper alloy resists corrosion in most environments
Monel 400 is a nickel-copper alloy that is resistant to corrosion in many environments. It consists of two crystalline solids that, together, form a single new solid.
Monel was the brainchild of Robert Crooks Stanley of the International Nickel Company. Patented in 1906, it was named for the president of the company, Ambrose Monell. The second "L" was removed from the name of the metal because, at that time, it was not possible to patent a person's name.
There are multiple variations of Monel alloys, starting with Monel 400, which contains at least 63 percent nickel, between 29 and 34 percent copper, between 2 and 2.5 percent iron, and between 1.5 and 2 percent manganese. Monel 405 adds no more than 0.5 percent silicon, and Monel K-500 adds between 2.3 and 3.15 percent aluminum and between 0.35 and 0.85 percent titanium. These and other variations all are valued for their resistance to attack by acids and alkalis, as well as for their high mechanical strength and good ductility.
Monel 400 contains the same quantity of nickel and copper as is found in a naturally occurring nickel ore in Ontario, Canada. It has high strength and can be hardened only by cold working. Due to its resistance to deterioration, alloy 400 is most often used in parts found in marine and chemical environments.
While it is a very useful metal, it is cost-prohibitive in most applications.
Monel 400 costs 5-10 times as much as ordinary nickel or copper. As a result, it is used rarely—and only when no other metal could do the same job. As an example, Monel 400 is one of the few alloys that maintains its strength in sub-zero temperatures, so it is used in those circumstances.
According to , machining techniques used for iron alloys can be used for Monel 400, though it is difficult because it work-hardens during the process.
If hardening Monel 400 is the goal, cold working, using soft die materials, is the only option. Through cold working, mechanical stress, instead of heat, is used to change the shape of the metal.
Azom.com recommends gas-arc welding, metal-arc welding, gas-metal-arc welding and submerged-arc welding for Monel 400. When hot working Monel 400, temperatures should range from 648-1,176 degrees Celsius (1,200-2,150 degrees Fahrenheit). It can be annealed at 926 degrees Celsius (1,700 degrees Fahrenheit).
Because of its resistance to acids, alkalis, seawater, and more, Monel 400 often is used in applications where corrosion might be a concern. According to Azom.com, this includes marine environments where fixtures, valves, pumps, and piping systems are needed.
Other applications sometimes include chemical plants, including environments using sulfuric acid and hydrofluoric acid.
Another are where Monel 400 is popular is the eyeglass industry. It is among the most popular materials in use for frames, specifically for components along the temples and over the bridge of the nose. According to , the combination of strength and resistance to corrosion make it useful for frames.
A drawback, though, is that it is difficult to shape, limiting its usefulness for some frames.
Though valuable in many applications, Monel 400 is not perfect. While resistant to corrosion in many ways, it cannot withstand nitric oxide, nitrous acid, sulfur dioxide, and hypochlorites. So, Monel 400 should not be used in environments where it would be exposed to those elements.
Monel 400 also is susceptible to galvanic corrosion. This means aluminum, zinc, or iron fasteners can quickly corrode if they are used with Monel 400.
Standard Composition of Monel 400
Monel alloy 400 is composed of between 29 and 34 percent copper and a minimum of 63 percent nickel. Manganese, iron, and silicon also are present in smaller amounts. The following describes the standard composition of Monel 400:
- Nickel (plus cobalt): 63 percent minimum
- Carbon: 0.3 percent maximum
- Manganese: 2.0 percent maximum
- Iron: 2.5 percent maximum
- Sulfur: 0.024 percent maximum
- Silicon: 0.5 percent maximum
- Copper: 29-34 percent
Properties of Nickel-Copper Alloy Monel 400
The following table describes the properties of Monel 400. Relative to other similar metals, it unusually is strong and corrosion-resistant.
|Property||Value (Metric)||Value (Imperial)|
|Modulus of Elasticity||179||GPa||26000||ksi|
|Thermal Expansion (20ºC)||13.9*10-6||ºC-1||7.7*10-6||in/(in*ºF)|
|Specific Heat Capacity||427||J/(kg*K)||0.102||BTU/(lb*ºF)|
|Tensile Strength (annealed)||550||MPa||79800||psi|
|Yield Strength (annealed)||240||MPa||34800||psi|
SubsTech. Substances & Technology
Special Metals. Monel Alloy.